You go to the fridge to get a cold drink, but the compressor won’t start, and the light is on. This can be incredibly frustrating, especially if you’re in the middle of a hot day and all you want is a cold drink. The good news is that there’s an easy way to bypass the start relay on your refrigerator and get it running again. But how to bypass start relay on refrigerator?
All you need is a screwdriver, a pair of pliers, and a few minutes of your time. First, locate the start relay on your fridge. Once you’ve found it, unscrew the cover and pull the start relay out of the fridge. Now, take your pliers and bend the end of one of the wires so that it’s touching the other wire. This will bypass the start relay and allow the fridge to start.
Read this article to learn more about how to bypass start relay on refrigerator. With this guide, you’ll be able to fix your refrigerator in no time – without having to call a repairman. Plus, you’ll save yourself the hassle and expense of having to wait for a repairman to come out to your home.
What Is The Start Relay On A Refrigerator And What Does It Do
The start relay is a component in most refrigerators that is responsible for providing power to the compressor. This component is activated when the fridge goes into the cooling cycle, and it turns on and off in order to maintain the desired temperature within the cabinet.
The start relay is a crucial part of the fridge, as it allows the compressor to function properly. Without this component, the fridge would not be able to maintain its proper temperature.
In terms of operation, the start relay works like an on-off switch. When the fridge is first turned on, the start relay will provide power to the compressor in order to start the cooling process.
Once the desired temperature is reached, the start relay will turn off and allow the fridge to enter standby mode. This on-off cycle will continue as long as the fridge is turned on and ensures that the cabinet stays at the correct temperature.
Overall, the start relay is a key component of the refrigerator that helps to keep it running smoothly. Without this part, the fridge would not be able to maintain its proper temperature, and it would eventually stop working altogether. If your fridge is not cooling properly, it is possible that the start relay is defective and needs to be replaced.
How To Bypass Start Relay On Refrigerator
Refrigerators contain a start relay that helps them to start up and run. If this relay becomes faulty or stops working, the refrigerator will not start. So, how to bypass start relay on refrigerator? In some cases, you may be able to bypass the start relay by following a few simple steps.
Step 1: Remove The Cover Plate
First, make sure to follow all safety instructions and consider moving the refrigerator away from the wall. Next, remove the cover plate from the bottom back of the refrigerator and set it aside.
Step 2: Pull The Relay Out
Then, using a screwdriver, push or bend the metal box inside the bottom right rear of the refrigerator until it is disengaged. This will allow you to see the relay system. Gently press on the gap between the start relay and its case using a flathead screwdriver, and then disconnect the relay from the refrigerator by pressing on it and pushing it out.
Step 3: Loosen And Remove The Metal Connector
Slide the cable from the relay out of the way and loosen the metal connector that connects it to the system first. Then, using pliers, remove some wire (somewhere under 1/4 inch) from either side of the connector. Finally, reconnect both wire ends back to the system using electrical tape and reassemble the cover plate and rear cover of the refrigerator.
By following these simple steps, you can bypass the start relay on your refrigerator and get it running again.
Why Would You Want To Bypass The Start Relay On A Refrigerator?
There are a number of reasons why someone might want to bypass the start relay on a refrigerator.
Reason 1: The Fridge Is Not Cooling Or Functioning Properly
One reason might be if the fridge is not cooling properly and the start relay is stuck in the on position, preventing the fridge from starting up. Another reason might be if the start relay is worn out and no longer functioning properly, causing the fridge not to start up. In either case, bypassing the start relay can be a quick and easy way to get your fridge running again.
Reason 2: Test Whether Or Not The Fridge Is The Cause Of The Problem
Another reason to bypass the start relay is if you are troubleshooting a problem with your fridge and you want to isolate the start relay as the potential cause. Bypassing the start relay will allow you to test whether or not it is the cause of the problem.
If the fridge starts up without the start relay, you know that the start relay is the problem and can replace it. However, if the fridge still does not start up after bypassing the start relay, you know that the problem lies elsewhere and can continue troubleshooting.
Regardless of the reason, bypassing the start relay on a refrigerator is a relatively simple process that anyone can do. Simply locate the start relay on the fridge, disconnect it, and then reconnect the wires. This will bypass the start relay and allow the fridge to start up without it.
Just be sure to reconnect the start relay once you have finished troubleshooting or repairing the fridge so that it can continue to function properly.
Things To Note When Disconnecting The Refrigerator Relay
When disconnecting the refrigerator relay, there are a few things to keep in mind.
- First, always unplug the refrigerator before working on it. This will prevent you from getting shocked.
- Next, locate the refrigerator relay. It is typically located at the bottom of the fridge, near the compressor. Once you have found it, disconnect the wires by unscrewing the connectors.
- Be careful not to touch any of the other wires while you are doing this, as they may be live.
- Always test the fridge for several hours after disconnecting the relay, to make sure that it is safe to use.
- Don’t leave the fridge unplugged for more than a day, as this can cause the food to spoil.
- If you are not comfortable working with electrical components, always consult a qualified technician.
How To Test The Start Relay On A Refrigerator
Testing the start relay on a refrigerator is a relatively simple process.
Step 1: Unplug The Fridge And Remove The Cover
The first step is to make sure that the refrigerator is turned off and unplugged. Next, remove the cover of the refrigerator and locate the start relay. The start relay is generally located in the upper left-hand corner of the refrigerator.
Step 2: Pull The Start Relay Out Of The Refrigerator
Once you have located the start relay, use a screwdriver to remove the screws that hold it in place. Carefully pull the start relay out of the refrigerator and take a look at it. The start relay should have two wires coming out of it – one black and one white.
Step 3: Test The Start Relay By Using A Continuity Tester Or A Multimeter
The next step is to test the start relay. To do this, you will need a continuity tester or a multimeter. Connect the black wire from the continuity tester to one of the screws on the start relay. Connect the white wire from the continuity tester to the other screw on the start relay.
Turn on the continuity tester or multimeter and check for continuity between the two screws on the start relay. If there is continuity, then the start relay is working properly. If there is no continuity, then the start relay needs to be replaced.
Step 4: Replace The Relay And Restart The Fridge
Replace the start relay if it is not working properly and reattach it to the refrigerator using screws. Replace any covers that were removed and plug in the refrigerator. Turn on the refrigerator and test to make sure that it is working properly.
What To Do If The Start Relay On Your Refrigerator Is Not Working
If the start relay on your refrigerator is not working, there are a few possible causes. The most common reason is that the fridge is not getting power. Make sure that the fridge is plugged into an outlet and that the outlet is working. If it is plugged in and still not getting power, there may be a problem with the outlet or with the fridge’s wiring.
If the fridge is getting power but still not starting, there may be a problem with the start relay itself. You can test this by unplugging the fridge and plugging it back in. If the fridge starts when you do this, then you know that the start relay is bad and needs to be replaced.
If you are unsure what to do if your refrigerator’s start relay is not working, please consult a professional technician for assistance.
Q: What are some common causes of a start relay failure?
There are a few common causes of start relay failures.
- One is that the start relay becomes corroded and starts to short out. This can happen if the compressor is not cleaned regularly and debris builds up on the relay.
- Another common cause of failure is a failed capacitor. If the capacitor fails, it will not be able to store enough energy to start the compressor motor, and the relay will not be able to complete its circuit.
- Finally, a failing compressor can also cause the start relay to fail. When the compressor starts to wear out, it puts added strain on the start relay, which can cause it to fail.
Q: What are the symptoms of a bad start relay?
A: Symptoms of a bad start relay can vary depending on the make and model of the fridge, but may include a clicking or humming noise when the engine is started, trouble starting, or a decrease in cooling power.
If you experience any of these symptoms, it’s important to take your fridge to a technician to have it looked at. A bad start relay can cause serious damage to your motor if not repaired.
Q: Can I replace a start relay on the refrigerator myself?
Replace the start relay on your refrigerator by following these steps:
- Unplug the refrigerator from the power outlet.
- Remove the access panel to the start relay, which is usually located near the bottom of the fridge.
- Use a multimeter to test the start relay for continuity. If there is no continuity, then the relay needs to be replaced.
- To install the new start relay, simply reverse the steps above. Be sure to match the new relay with the correct voltage and amperage rating.
- Plug the refrigerator back in and turn it on. The start relay should now be working properly.
If you do not feel comfortable replacing the start relay on your own, then you can always contact a qualified appliance repair technician to do it for you. Most fridge repairs are relatively simple and can be completed in a short amount of time.
In this article, we have shown you how to bypass start relay on refrigerator – the quick and easy way. If your fridge is not starting up, it may be due to a faulty start relay. Bypassing the start relay is a quick and easy way to get your fridge up and running again.
We hope that this article has been helpful and that you can now get your fridge up and running in no time. Thanks for reading!