Top Best Wood Stain For Stairs: Best For Quality!

The best lathe for turning bowls is a type of machine working on the principle of rotating around the center of the workpiece to perform different activities: sanding, drilling, cutting, typing …

Currently, lathes are commonly used in machining – metal spinning, heat spraying, wood processing and glass processing … Besides, lathes are also used to shape ceramics with potter wheels.

Lathes of every scale will do good work in the bowl; this just determines the size including its bowl. 

Bigger lathes may also be more robust, meaning that they might accommodate larger pieces of wood without shaking them too much. For others, a wide wood lathe may be overcrowded. Others like to get a big lathe in order to transform anything pretty much.

Selecting the best lathe for turning bowls carefully also for best value seems to be important, since you need a safe sailing boat with outstanding navigation in this ocean.

Here we’ll show you that I looked for top 19 Best Lathe For Turning Bowls and share the findings with you. Let’s see what all this is about without wasting more time.

Best Lathe For Turning Bowls Comparison 2022

** Below, you will find our detailed reviews of the best lathe for turning bowls, but you can also click these following links to see current prices or read customer reviews on Amazon.

Top 19 Lathe For Turning Bowls Reviews 2022

Laguna Revo Lathe

The first design you will no doubt be able to have is the ergonomic anodized aluminum angled control panel. The blue color of the DRO with the lovely knurled control button fitted with just a leather grip signaling is not an ordinary timber. This bed was made of steel that makes that stainless steel headstock unbelievably smooth. 

Steel is the favorite substance because of its well-known longevity and strength. An effective speed is achieved through a VFD which converts 1 input step to 3 output, so you get an unbelievable amount of voltage even in low settings. The DRO gives you precise RPM readings, these fine changes have been made electronically at all times. 

The short release handle facilitates the change between high and low settings. Both headstock And tailstock key handles are attached to the back of your workflow to avoid interruptions. Ergonomically engineered handles are using a cam lock which results in an unwieldy feel.


  • The induction engine is very silent.
  • Smooth & Consistent power supply.
  • Sliding headstock for narrower workplaces or 32″ turning with optional bed expansion.
  • Speed system is simple to use with a very bright LCD monitor.
  • The belt shift from high to low speed requires just secs and requires no instruments.
  • Unbelievably heavy tailstock as well as quill.
  • The banjo was long and short, and the remainder of the tool is compensated by the banjo, which Laguna takes incredibly carefully.


  • That spindle locks upon this headstock allows you to keep it attached.


Description of the JET 1840EVS woodwork lathe. This lathe is built to be as flexible if you’re in the store with a headstock which slips across the bed’s entire length. The 4-inch iron rises have a work height which really maximizes your convenience.

This best lathe for turning bowls seems to be the cheapest and most important choice in this group. The price principle implies  a 1.5-hp engine, an 18-inch turn and just 330 pounds light weight. That’s more than ample strength and swing, and even the lower cost ensures, for many turners, they get a highly competent lathe, without worrying about the cost.


  • Infinitely variable electronic velocity from 50 to 3,200 RPM.
  • 4″ carbon steel lifters allow the user to change the lathe height.
  • The leg-mounted owner closes your tools.
  • External emergency stop press magnet-backed, can be mounted along the bed of the lathe.
  • Banjo uses a non-marring, Constructive wedge locking mechanism to keep the tool post firmly.


  • Does not really have a swivel headstock

Powermatic 3520C

The 4th development of the time honored the Powermatic 3520C with several new and upgraded features. The 3520C preserved all the features of previous versions, including the sliding headstock, low- or high-speed electronic variable speed, the spindle lock, the optical RPM read, and a self-ejecting laser etched slide.

The features are improved by a retractable control box with full flexibility, flexible riser blocks, height adaptation for 6 cm or more and even a value increase of 726 LBS.

Further specifications also include new ergonomic lock spindle, another virtual indexing readout, the smoother operating rotation tailstock key, a collection of dead centres which carry a spindle to be visually comparable, an optional bed expansion mount with two places and a brass-type sliding hammer knock roll.


  • Headstock requires a wireless reading.
  • Place the magnetically backed moving control box in which it is best.
  • Stair blocks permit for even a height change of four inches.
  • Specially designed VFD.


  • Quite expensive.

Grizzly Industrial G0766

This hinge is ideal for serious wood-burners who really want to transform big pots, bits of furniture as well as other significant designs. This rod seems to have plenty of clarity and torque for large ventures at low speeds, with a 22″ swing, a 1-1/4″ x 8 TPI RH spindle, an electrical variable speed control and a 3-phase, three-phase motor that works out one-phase energy using a variable frequency drive. 

This lath is incredibly stable because of its strong cast-iron mattress plus stand, and its headrest can be located anywhere on the bed, allowing you a full range of leverage and versatility for your designs. See all the fantastic characteristics below


  • Digital read-out electronic variable speed control for RPM spindle
  • Headstock places somewhere in the bed
  • Tiny 100-1200 rpm speed range and high 100-3200 rpm speed range
  • Tailstock, headstock and tool rest help have leverage camera locks for quick placement
  • Regulation of forward/reverse spool


  • That legs are indeed very high


JET JWL-1221VS Standardized wood dressing is our option for the best wood dressing overall. It comes with a powerful engine capable of delivering 60 to 3600 rotations per mins (RPMs), which can be adjusted through the control knob that is more than enough with most projects. 

The lath turns seamlessly on a switch’s reverse and forward. The spring loaded spindle lock enables the changing of wood ventures, and the belt tension with the single rocket-style tensioning mechanism is simple to modify.

That JET JWL-1221VS was really smooth and then we could just complain that its engine seems to be a little large at 135 pounds, also under the central shaft which causes a lot of shaving and dust to be collected. It offers 21 centimeters between centres and perhaps a 12-inch motion.


  • RPM 60 – 3600
  • Advance and reverse
  • Belt tensioning mechanism in Ratchet form
  • Spindle lock fitted with a spring
  • 21″ from the cores
  • Swing 12″


  • The engine lies under the head block and absorbs cuts and ashes.


The second wooden lathe on that whole suggestions page is the wider edition of one of the top 5 mini-laths. RIKON’s VSR Midi Lathe power tools are pretty like that of the 70-100 Micro Lathe – and not only in style but in functions as well.

A midi lathe has twice the power of a one hp energy system compared to its mini version. Its 12,5-inch swing and 20-inch spindle capability are sufficient to produce big bowls or platters.

Not only is the engine double the size of its mini edition. It has an amazing 24-position indexed head which provides exceptional precision to build designs and patterns. I particularly liked the dual forward and reverse turning features. These things make Rikon becomes one of the best lathe for turning bowls

You don’t have to think more about turning speed because it has electrical variable speeds between 250 and 3,850 RPM.


  • Ideal for small and medium-sized projects
  • You may opt to get it on its stand or have one on the concrete.
  • Coming with a manual that is simple to understand
  • LED show that allows you to precisely track the speed


  • Simple for a noon and can fall from the budgets for newcomers & hobbyists

Powermatic 4224B

That Powermatic 4224B seems to be the largest, heaviest and most capable theater we have ever designed from over 900 pounds. It opens the boundaries of artistic opportunity and carries the creativity to the whole new dimension. The 4224B stretches the boundaries of architecture, creativity and reliability with its freshly built, high quality functionality.

Expand your artistic capabilities and carry your enthusiasm to a whole new stage mostly with Powermatic 4224B – the latest member of the leading lathes family. With freshly built, its 4224B will challenge your style, creativity and longevity boundaries.


  • Superfast lights
  • Chuck with vacuum included
  • Rubber seals on even a vacuum chuck gives signs to the object
  • Handle also on tail-stock is hard and immediately flips open – the handle has been removed and it is perfect
  • Controls of engine and rpm
  • Mechanism of banjo locking


  • Quite heavy

WEN 34027

Wood bench lathes feature made up of small tasks requiring only minimal power with spindle/swing capability. The WEN 3420T Bench-top Wood Lathe also has a flat wrench, 2 hex wrenches, an attachment holder, a knock-out reel, the spur center and a center for the cup.

Unlike the bulk of Midi- and Full-Size Dreams, the WEN 3420T Dreamset provides 5 distinct speeds. In particular, we liked the careful incorporation of a 3,125-inch façade which could be used for spindle parts such as cups & bowls.

Its machine would not need to think about fuel, because its 4.5A engine produces an optimum torque for even a bench-top reel. Its robust structure with a frame of more than 70 pounds means that no wobbling and vibration happens during service.

And it’s one of its most sensible lathes that you can find so it’s ideal for beginners.


  • Makes it super easy clamping mechanism which is used to configure both the rear and tool rest precisely
  • It is suitable for workpieces up to 8 cm wide & 12 cm tall.
  • Ideal for tiny bits such as chess pieces with designs
  • Comes with various accessories, which add huge good value


  • No hole is firmly attached to every surface and even if the ground is really not completely smooth, it wobbles

JET JWL-1015

That JET JWL-1015 seems to be a lightweight wood burning tile with intelligent enhancements which streamline your system work & general power. – A cast-iron extra broad bed of 130 mm ensures flexibility and minimal movements, which ensure additional protection while rotating. 

The platform is also 3 kg thicker than any of its predecessors. The spindle is located in sturdy bearings and has the powerful speed control motor with enough torque. This is without question the strongest mini lath to manufacture expert and novice towered pieces, such as jewelry, pots, bowls and parts of furniture.

That JET JWL-1015 is really the perfect option for novices searching for an inexpensive, user friendly first torch and for experienced enthusiasts or professionals wishing to bring a complete mini-turner to the store. This durable, smooth 15″ mini-pin is strong, accurate and flexible to carry out a broad range of projects. Once you are about to put your theories into practice


  • Integrated indexing of 24 positions
  • Easier entry to loops.
  • Wider bed forms. 
  • Speed changes are fast and simple
  • Great for the new customer, easy to work and quality building


  • Quite expensive for mini lathe

WEN 34018 

That JET JWL-1015 seems to be the perfect option for novices searching for an inexpensive, user friendly first torch and for experienced enthusiasts or professionals wishing to bring a complete mini-turner to the store. This durable, smooth 15″ mini-pin is strong, accurate and flexible to carry out a wide range of projects. When you are able to put your ideas into motion.

The Jet JWL-1015 would not suit those working on massive bowl turning programs. Instead, the JWL-1015 is superbly lightweight. It’s perfect for people who don’t work for more than 10″ bowl diameter.

500 RPM is not the lowest possible level, but it can also rise to almost 4000 RPM. For most people operating on a laptop lathe, the 6 speed settings ought to be sufficient.


  • Strong big bed
  • Six speeds between 500 and 3975 rpm
  • Compact center-to-center range 15-1/2″
  • Decent 10″ small lathe swing


  • Not for big ventures and reverse incapacity.

Mophorn Wood Lathe 10 x 18 Inch

It is indeed a funding wooden bench lathe. Mophorn sells this extraordinary device in three variations  with a digital monitor. For the digital monitor model, we used and tested the 10 x 18 inch.

This Mophorn wood lathe has a first-class Construction that after doing results. It comes with a strong 550W drive with varying speed with electronic readings that make you an unforgettable experience in woodturning. Their pace is between 500 and 3,800 RPM.

The bundle includes a toolbox, a toolkit and even a manual. You have a swinging total of approximately inches over your bed and then an 18-inch gap between the centre. We especially enjoyed the cast-iron hard Construction combined to rubber feet should provide greater stability and reduce inefficiency in operations


  • Comes with an excellent 550W engine
  • Features a robust cast iron building
  • Headstock has shafts and gears that are specifically grounded to guarantee silent operations with longer service life.
  • Requires rubber feet to increased operational flexibility


  • For certain small & complex ventures, the speed limit around 500 RPM can be a little quick

Mophorn Wood Lathe 370W Power Motor

An efficient 550W motor and affective spindle function and a virtual RPM rereader, make it a top option for accurate speed changes. This beautiful wood lathe would be renowned for its high-quality characteristics. It has an outstanding style. The best lathe for turning bowls while turning choice is greater than most other brands. High-duty cast iron building as well as rubber feet offer greater stability with smooth turning.

Both gears & shafts in the headstock were exactly grounded then hardened to last longer life and quiet operation. Both machines are equipped with high-quality electronic units.


  • Strong engine and speed for accurate speed with remote readings
  • Cast iron wood lathe including rubber boots, improving flexibility and smooth running
  • Both gear and shafts have been specifically grounded as well as strengthened for long life and silent action in the headstock.
  • Electronic units of high quality are applied in the machine
  • High pressure wood lathe, an excellent instrument for classrooms, factories, engineering and instruction.


  • Hard to install


A 12-inch workspace is provided for work on smaller projects throughout the SHOP FOX W1704 Beater Lathe. It has two rests for different turning applications. The 1/3 HP motor produces upwards to 3,200 RPM and varies in speed. Cast iron is durable, but the whole unit weighs just 52 pounds.

We found it’s not very strong when we used that SHOP FOX W1704 and it always slipped down except when operating on small tasks, and the buckles would often move freely from the sensations. It has 12-inch intervals and even an 8-inch motion.


  • 12″ from the cores
  • Cast iron building
  • Two resources remain
  • RPM 700 – 3200
  • Speed variable
  • 12″ from the center
  • Swing 8″


  • Knobs are getting loose

Mophorn Wood Lathe Variable Speed 500-3200RPM

The Variable Frequency Benchtop Micro Wood Lathe has a 500–3200 RPM variable speed, a 1/3 hp engine and even an MT1 pulley. Smooth startups promise protection for the workpieces as well as the engine. Precise architecture is ideal for diverse applications in laboratories, workshops, manufacturing & education.

Mini lathes made of cast iron are of improved stability as well as smooth running. Two different instruments of 150mm And 300mm rest for different turning needs. Top timber bench, an excellent instrument.


  • Wide Application
  • Stable surgery
  • Strong engine
  • Large capacity for work
  • Speed variable


  • The tap seems to be too hard to find out in the retail shop

Mini Metal Lathe CNC DIY

This is indeed a mini machine tool that can be turned, boiled, threaded and processed. The principal sections of the main box of the shaft, transitional block, linking block, tailstock, major slider, little slider, hand wheel, metal brace, etc. Product Consistency is better, more reliable and more accurate.

Made from specialized aluminum alloy, lasting, non-deformable to be used. Materials in processing: wood, plastics, steel, aluminum and many other soft materials. Clamping diameter of the three-jaw chuck: 13mm claw, reverse claw of 45mm. Processing ability: soft metals like copper and aluminum can be processed.


  • Lightweight fabrics of high quality.
  • Maximum diameter of manufacturing
  • Three-yellow chuck diameter clamping
  • Processing capability: soft metals like aluminum and copper can be processed.


  • The supply unit used is too poor for an amp to work

WEN 3421 3.2-Amp

Significantly increase the current wood latte ability

That WEN Variable Wood Lathe can now allow you to comfortably fit workpieces upwards of between 12 inches in length & 8 inches tall. The minimal style is suitable for styluses, pots, cups, cabinets and several other small pieces of work. Through this app, you will work on bigger tasks in your house.

WEN offers a robust base for different work parts with a wonderful Construction quality. Crafted from cast iron, it has a 2.3-inch face plate, the MT1 spindle plus tailstock taper as well as 2 interchangeable remains.


  • Fast, durable and quick to run
  • Perfect for styluses, bowls, cups, pieces of chess and several other small pieces
  • Shift the variable speed variable motor
  • Includes an 2.3-inch features, MT1 spindle plus tailstock taper, or even two equipment repositories.


  • The lathe to be underpowered

Shop Fox W1758

One of the most competitively priced, professionally featured as well as efficient lathes mostly on market. The beauty is handled by a 2 HP heavy engine, 10 rates, a swivel head for external spinning, a mechanical spindle tachometer for specific speeds, a precise iron mattress, headstock including rear end fast locks plus strong cast iron wheels for stability.

The W1758 provides an extension three-way flexible tool rest. The customizable tool rest follows the tool you are using correctly. With basic locking handles, the rest can be changed to the required distance and angle from the workpiece.


  • Outboard Turning Extension
  • Adjustable Iron Cast Threshold
  • This lathe has an iron tailstock with accuracy.
  • Change the rear center quickly and conveniently to handle workpieces of upwards to 46-inch long.
  • System Cam Activity Clamping


  • That tailstock quill seems to be a little weak.

Grizzly Industrial G0838

Combine the versatility & features of this lightweight G0838 16″ x 24″ wood variable speed pulley with a much larger pulley. Don’t be fooled by its small footprint, this stout computer has so much to deliver. 

The Two HP 3-phase engine with a VFD to run with a single-phase capacity of 220V allows you to transform hard wood at very low speeds. In addition, the headstock slips over the precise cast iron bed and thus can be mounted on the rear side to switch even larger parts outboard. This device is the illusion of a bowl-turner!


  • Heavy cast iron beds and legs guarantee comfort and minimize vibration.
  • Tachometer for optical spindle speed
  • Fast, simple and safe adjustment of cam lock and tailstock
  • Headstock adjustments for turning outboard
  • Simple tool holder built-in
  • Advance and reverse power


  • That loose legs make this method a little shaky

Delta Industrial 46-460

That Delta 46-460 offers just what your spinning masterpiece needs to achieve.

The adjustable electronic pulley mechanism variable speed minimizes vibration as well as conversation. The proprietary strap tensioning mechanism makes speed adjustments fast and simple and puts the belt in the right position for optimum transmission strength and stronger tool life.

An indexing pin locks the headstock spindle in 24 separate positions for fluting and perhaps other decorative applications.

The Delta 46-460 commercial 12-1/2 inches variable speed synth lathe has a ball-bearing alive core, large metal lockout bar plus onboard storage to make easy access to modification equipment. This machine is suitable for experienced woodworkers and provides fast, smooth outcomes and a variable accuracy and control speed.


  • Strong engine with variable speed ensuring reliability and stability
  • Forwards and reverses a superior performance
  • Patented quick speed and long tool life belt tensioning system
  • Cast-Iron structure for strength and durability


  • Less vibration runs at medium and empty speeds.

Guide to Buyer

What brings a Bowl Turning Lathe great?

The wood laths may seem like a complicated bully, but they’re not that complicated, and you only need a few main components. Let’s look at certain important items while shopping for best lathe for turning bowls 

You can’t have to go to a retail shop then presume that the attendants know it all, particularly anything less dark than a tear. In the first place, every lath will be fine in the bowl, depending on the needs. 

The Bowl’s Bed

That bed is how all your latter’s components lie. In many other words, the carriage drives around a rectangular board. Each surface has a major role in the calculation of the device swing. Go to a lathe which will make a perfect bed you can.

The threshold

Tailstock corresponds to the edge of the workpiece’s bed. This section of the unit can be moved and adjusted to accommodate various workpieces.

The rest of the tool

It’s really the wood panel that travels over the bed. This section includes basically all the resources you would possibly require for your different tasks: Moreso, chisels. 

The Chuck

That spindle which rotates your creations is connected. However, its primary role is to keep the workpiece. The chuck usually does indeed have a 3-jaw and perhaps a four-jaw, according to various computer styles.

The Spindle

The spindle rotates the workpiece. This component is attached to the engine through a long spindle spinning shaft. The spindle sticks to just the chuck that supports your designs for woodworking.

Lathe Speed Gauge

It is a component of a wood. This section offers the ability to change the turn speed. Make sure your computer has an easy-to-read speed indicator.


Your budget can vary Considerably according to the intent of timbering. For newcomers & hobbyists who are not generating significant revenue, a mini-turno is perfect since it costs an average of between 200 or 500 dollars.

The midi lathe with a range of 600 and 900 USD will be the best lathe for turning bowls for users with some expertise in the sector who seem to have a higher budget. Skilled woodturners and experts would probably require a lot of money for such a massive lathe.

Slow Start Engine

The sluggish start feature of an engine improves the safety of this instrument. For instance, you have to have a lathe with even a slow start whether you are completing a task block of wood. Engines without that kind of feature will often cause wood to fly if not well-connected, and the engine begins at high speed.

Control of horses

The power generated by the engine is at the core of the device. You can modify speed by sweaters and other means, but the horsepower remains essential for the torque and the project will continue to slow down with little or no torque as you push your tools against something.

If you don’t just create pencils, we strongly suggest a torque of at least another height to provide sufficient torque also for the project.

The Iron Cast Bed

It may be small, but it retains one of several key characteristics of a wood tile. The cast iron protects your tool against unintended injury.

Distance from the centres

The centers keep the wood in place and the space between them indicates the length of your wood. Most of the items on this article have a gap of around 16-inch between the cores, but they can differ Considerably even in some situations, by adding extra components to your instrument.

Since a broader gap between centers helps you to work with a larger project, we suggest that you get the bigger one. If you decide you would just like to produce smaller items such as ink styles or piano keys, the shorter time between centres.


Swing relates to the width of your wood as it is installed in the middle until it hits the table. Like the gap between centres, a greater swing value suggests that you can undertake a bigger project, so strive to make the larger project you can handle without thinking you won’t get it.


High RPMs lead in most situations to quicker workflow and even a cleaner finish. If the person does not work quickly enough, its tools are not well cut, and the wood could be picked and chips produced. Greater RPMs are so often easier, but ensure that additional performance is included in the contract.

Speed variable

The opportunity to shift speed seems to be a vital aspect about how a timber operates and many tools are available for the change of speed, such as dials, pulleys change or friction adjustment. We find that the quickest way to get there is to change the dial rpm, and sometimes you can do that in real time. The other approaches are not challenging if they are correctly instructed, but best suited to long-term ventures that stay at almost the same speed.


As described in our review articles, you can pick from three wooden lathes – mini- with bench-top, mid-size and full-size. Depending on the storage and specifications in your workspace, you can select one of these 3 types.

If you still have little room and you just want to transform tiny items like plumes, hoops, and bowls into a mini-turnout. If you’ve a great workshop, go to a full size lathe and transform wood for both a living. If one of those two solutions does not have a resounding yes, you can glance at a midi lathe.


Another thing you may want to know is how much you weigh before buying a wood lathe. While the majority of designers on this page are less than 100 pounds, they will also surpass this. It is not unusual to just buy a few of these devices to discover later that you have to connect it together. Often ensure that you can maintain your weight, particularly before buying and lathe.

Reverse direction

Though many models do not provide this, the reverse direction could offer a lot of versatility to the Consumer, particularly when sanding or washing. In most situations, a button flip is all you need to change position.


Besides choosing an appropriate best lathe for turning bowls, cleaning regularly and properly will last the time of using for your lathe. Watch this video to understand more about the process of cleaning your lathe. 

Closing Thought: Our Top 5 Picks Of Best Lathe For Turning Bowls 

But that’s a lot of it. I hope that now you can determine which lathe suits your programs and strategies best.

All the best lathe for turning bowls I suggest are marketed and used on a regular basis by several woodturners and get good backend service. You should then still request them to solve delivery problems within the guarantee duration.

When you buy the right wood lumber, you will not hit the end – you also have to buy high-quality equipment that fits your unit. Things that define is an ability which can be perfected immediately. There is a steady, but Consistent learning curve in this craft, so you can progress with Constant effort.

But it’s all right to be cynical when spending on anything. Plan the budget accordingly. We hope that you liked reading our review and find it useful to pick your best lathe for turning bowls.

Leave a Comment